Controlling ColorBox Panels via a DMX Board

This article is part of a series on Controlling ColorBox Panels, to view other articles in this series, simply search "ColorBox Control". 

Controlling ColorBox Panels from a DMX Board:

Make sure Dip Switches are set appropriately for DMX Mode (for information on how to edit Dip Switch Modes, please review this article.)

Slider One:

0 = Off

1 - 127 = Brightness from Dark to Light

128-255 = Strobe Effect, from Slow to Fast

Slider Two:

0 - 255 = Red LED Brightness

Slider Three:

0 - 255 = Green LED Brightness

Slider Four: 

0 - 255: Blue LED Brightness

Adjusting Sliders 2-4 in unison will adjust the Color Output of Each LED Type, this is how you achieve Color Mixing.

• Related Articles

• Controlling ColorBox Panels via Built-in Dip Switches

  This article is part of a series on Controlling ColorBox Panels, to view other articles in this series, simply search "ColorBox Control".  Built-in Dip Switch Settings: To achieve desired effects of Panels, please edit the Dip Switches as follows.  ...