Controlling ColorBox Panels via Built-in Dip Switches

This article is part of a series on Controlling ColorBox Panels, to view other articles in this series, simply search "ColorBox Control". 

Built-in Dip Switch Settings:

To achieve desired effects of Panels, please edit the Dip Switches as follows. 

For a Full Red Only Effect - Set Dip Switches #1,2,3 to the "On" Position, and all others to the "Off" Position.

For a Full Green Effect - Set Dip Switches #4,5,6 to the "On" Position, and all others to the "Off" Position. 

For a Full Blue Effect - Set Dip Switches #7,8 to the "On" Position, and all others to the "Off" Position.

To enable an Auto Run Sequence - Set Dip Switches #9, to the "On" Position, and all others to the "Off" Position.

To enable a Color Cycling Auto Run Sequence - Set Dip Switches #1,2,3,9 to the "On" Position, and all others to the "Off" Position.

To enable a Slower Strobe Effect - Set Dip Switches #1,9 to the "On" Position, and all others to the "Off" Position.

To enable a Faster Strobe Effect - Set Dip Switches #2,9 to the "On" Position, and all others to the "Off" Position. 

To enable Sound Reactive Mode - Set ALL Dip Switches to the "Off" Position. 

To enable DMX Slave Mode - Set Dip Switches #10, to the "On" Positions and all others to the "Off" Position.

To enable DMX Control via DMX Ports - Set Dip Switches to appropriating DMX Fixture ID Numbers. (For more Information on DMX Control,please view this article).

Still Having issues with Setting your ColorBox Panel Dip Switches? Open a Support Ticket for Assistance.

• Related Articles

• Controlling ColorBox Panels via a DMX Board

  This article is part of a series on Controlling ColorBox Panels, to view other articles in this series, simply search "ColorBox Control".  Controlling ColorBox Panels from a DMX Board: Make sure Dip Switches are set appropriately for DMX Mode (for ...